Figure 7-3: Values Selection - Fluke ThermoView TV30 Series User Manual

®
ThermoView TV30 Series
Users Manual, Rev. 1.0, May 2023
Name
Emissivity
Maximum
Average
Minimum
Standard Deviation
Focus Area
The number of calculations for values is limited to 32. This limit is reached for example via 32 AOI's with one
mathematical value each (max, avg, min, std.) or 16 AOI's with 2 mathematical values each.
36

Figure 7-3: Values Selection

describes the AOI via a name
defines the desired emissivity value specifically assigned to the AOI
In case of overlapping pixels of several AOIs, the emissivity value of the last
generated AOI is applied for these pixels.
calculates the maximum for all pixels belonging to the AOI
calculates the average for all pixels belonging to the AOI
calculates the minimum for all pixels belonging to the AOI
calculates the standard deviation for all pixels belonging to the AOI
the focus of the camera is aligned with the location of that AOI when Autofocus Type
<AOI> is selected under the Configuration page. This function is exclusive for one
nd
AOI meaning no 2 AOI can have this function.
deletes the AOI.
Note