Table 7-2: Opc Ua Items - Fluke ThermoView TV30 Series User Manual

®
ThermoView TV30 Series
Users Manual, Rev. 1.0, May 2023
Device Item
ThermoView-
<name>
emissivity
transmissivity
backgroundTemperature
temperatureUnit
internalTemperature
<area of interest n>
conditions
calculations
Measurement Range
shutter
focus
serialNo
54
Access
read
read/write double
read/write double
read/write double
read
read
emissivity read/write double
<calculation n>
value read
<calculation> read
<condition> read
<condition n> read
<combination n>
<calculation> read
automatic read/write Boolean Automatic mode for the temperature sub-range
gainMode read
Temperature range
bottomRange read
topRange read
trigger read/write UInt32
autoShutter read/write UInt32
mode read/write UInt32
position read/write UInt32
autoFocusRequest read/write Int32
read

Table 7-2: OPC UA Items

Format Comments
Device name. If the user does not assign a name to the camera, the serial
number is used for <name>. Example: ThermoView-59280004
Global emissivity in the standard range 0.01 ... 1
Transmissivity in the standard range 0.01 ... 1
Temperature for background temperature compensation; value within the
device temperature range.
string Temperature unit
double Internal device temperature
Name of AOI
Emissivity of AOI in the standard range 0.01 ... 1
Calculated value of the AOI for the selected math function (maximum,
minimum, average, standard deviation)
single Calculated value for the AOI
single Result of the calculation where the AOI is involved
single Result of the condition where the AOI is involved
Listing of conditions and combinations
single Result of the condition or combination
single Result of the calculation
False = off
True = on
UInt32 Current temperature sub-range
double Bottom of temperature range
double Top of temperature range
Controls the shutter
0 = off
1 = initiates a shutter operation
Sets the automatic shutter mode
0 = off
1 = on
Sets the focus mode.
0 = Keeps current focus value
1 = When switching on, the device moves to the predefined position
2 = Autofocus mode. Focus initiated by autoFocusRequest = 1
Sets focus position in the range from 0 ... 100
Starts an autofocus search once.
0 = off
1 = on
string Serial number of the camera