Table of Contents
Advertisement
8.2.5 Swivel Bracket (A-BR-S)
The swivel bracket is to mount the camera in a moveable position, to correct in an easy way the pitch and yaw
orientation. For a correct imager orientation, you can pitch (0° – 90°) and swivel (0° - 360°) the imager sighting
axis. The base has a single control knob and a split-ball lock, to hold the specific head mount firmly in place.
Specification:
Circle diameter for three countersunk bolts
Countersunk bolts
Height with head mount beam
Weight with head mount beam
The mounting base A-TV-MB is required for the use of the swivel bracket. For this, the camera must first be fixed
on the mounting base as shown in Figure 8-11. Then the assembled can be attached on the mount beam of the
swivel bracket as shown below.
Figure 8-22: Mounting Base to be fixed to the Mount Beam of Swivel Bracket
109.5 mm (4.3 in)
6.3 mm (1/4") flat-head screws (not included)
120 mm (4.7 in)
1.07 kg (2.4 lb)
Figure 8-21: Swivel Bracket with Mount Beam
M6x20 (x2)
Accessories
8
Mechanical Accessories
85
Advertisement
Table of Contents
