Settings; Settings> <User Management; Figure 7-9: Shutter Settings; Figure 7-10: User Management - Fluke ThermoView TV30 Series User Manual

Enable Automatic Shutter
Input to disable shutter
Input to activate shutter
True when value is
Example
7.3 Settings Pages
7.3.1 <Settings> <User Management>

Figure 7-9: Shutter Settings

enables/disables the automatic shutter
links to an internal input of the camera or to a Wago input
links to an internal input of the camera or to a Wago input
"high" or "low" or "rising edge" or "falling edge"
Shutter is disabled when value on digital input 1 is equal to "high".
Shutter is triggered when value on digital input 2 shows a rising edge.

Figure 7-10: User Management

Web Server
7
Settings Pages
43