Camera Menu
The Camera menu has controls and options for secondary camera features such
as Compass, Video, Laser Pointer, Torch, and Backlight level.
Compass
The Imager (not applicable for Ti100) includes an eight-point cardinal
compass on the display. The compass has on and off functions. This compass
lets you accurately record the target locations for analysis and reports.
To set the compass:
1. Push V.
2. Push R/S to highlight Camera.
3. Push U or Y to view the menu.
4. Push R/S to highlight Compass.
5. Push U or Y to view the menu.
6. Push R/S to highlight ON or OFF.
7. Push U to set the option.
8. Push:
U to go back to the live view.
V or X to go back to the previous menu.
W to cancel the change and go back to the live view.
W shows on the display when the compass cannot make a reading.
Note
Thermal Imagers
Menus
31