Lexus NX 300h 2020 Owner's Manual page 90

88
2-1. Instrument cluster
Customization
■
The meter display can be customized on
the multi-information display.
(Customizable features: P.441)
WARNING
The information display at low tem-
■
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver's shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
personal death or injury.
NOTICE
To prevent damage to the engine and
■
its components
When the tachometer is displayed, do
●
not let the indicator needle of the
tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the
●
engine coolant temperature gauge is
in the red zone (H); or "Engine Cool-
ant Temp High" or "Hybrid System
Overheated" is shown on the multi-
information display. In this case, imme-
diately stop the vehicle in a safe place,
and check the engine or hybrid system
after it has cooled completely.
(P.416)
Changing between the odome-
ter, trip meter and maintenance
required information
Switches between odometer, trip
meter and maintenance required infor-
mation displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
Changing the Instrument panel
light brightness
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■ Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness. At this time,
any adjustments made to the instrument
panel brightness levels will be applied to
both settings at once.