Lexus NX 300h 2020 Owner's Manual page 244

242
4-5. Using the driving support systems
Distance options
Long
Medium
Short
Resuming follow-up cruising
when the vehicle has been
stopped by system control (vehi-
cle-to-vehicle distance control
mode)
After the vehicle ahead of you starts
off, push the lever up.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of
you starts off.
Vehicle-to-vehicle
distance
Approximately 160
ft. (50 m)
Approximately 130
ft. (40 m)
Approximately 100
ft. (30 m)
Canceling and resuming the
speed control
1
Pulling the lever toward you can-
cels the speed control.
The speed control is also canceled when
the brake pedal is depressed.
(When the vehicle has been stopped by
system control, depressing the brake pedal
does not cancel the setting.)
2
Pushing the lever up resumes the
cruise control and returns vehicle
speed to the set speed.
Approach warning (vehicle-to-
vehicle distance control mode)
When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehi-
cle-to-vehicle distance.