136
3-3. Adjusting the seats
Luggage room switch
2
Check that the plate for the seat
belt is on the front side of the seat.
When using the seat belt for the rear
center seat (P.29)
Operating conditions for folding down
■
the seatback (power seat)
When the following conditions are met,
switch operations are possible.
When operating the rear seat switch: The
●
seatback position is within the
in the illustration from the most upright
position.
When operating the instrument panel
●
switch or luggage compartment switch:
The seatback position is within the
range in the illustration.
●
When operating the rear seat switch:
When the rear door for the seat to be
operated is open.
When operating the luggage compart-
●
ment switch: When the back door is
open.
When the other operation switches for
●
the seat being operated are not pressed.
When the power switch is in ON mode, in
addition to the above, the power seat oper-
ates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
Operating conditions for returning the
■
seatback (power seat)
When the following conditions are met,
switch operations are possible.
When operating the rear seat switch: The
●
seatback position is within the
in the illustration from the most upright
position.
●
When operating the rear seat switch:
When the rear door for the seat to be
operated is open.
When operating the luggage compart-
●
ment switch: When the back door is
open.
●
When the other operation switches for
the seat being operated are not pressed.
range
A
When the power switch is in ON mode, in
addition to the above, the power seat oper-
ates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
B
• The shift lever is in P
range
A