Lexus NX 300h 2020 Owner's Manual page 378

376
6-3. Do-it-yourself maintenance
6
Turn clockwise and set the bulb
base.
7
Attach the clip to the cover.
Push up on the center of the clip and attach
the clip .
A
8 Attach the cover.
Align the 2 tabs positions and close the
cover and fix the cover by pushing the
A
center of the clip
B
9 Install the engine compartment
cover. (P.347)
.
WARNING
Replacing light bulbs
■
Be sure to stop the hybrid system and
●
turn off the lights. Do not attempt to
replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may
cause burns.
● Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
Fully install light bulbs and any parts
●
used to secure them. Failure to do so
may result in heat damage, fire, or
water entering the headlight unit. This
may damage the headlights or cause
condensation to build up on the lens.
● Do not attempt to repair or disassem-
ble light bulbs, connectors, electric cir-
cuits or component parts.
Doing so may result in death or serious
injury due to electric shock.
To prevent damage or fire
■
Make sure bulbs are fully seated and
●
locked.
● Check the wattage of the bulb before
installing to prevent heat damage.