Lexus NX 300h 2020 Owner's Manual page 245

Warnings may not occur when
■
In the following instances, warnings
may not occur even when the vehicle-
to-vehicle distance is small.
 When the speed of the preceding
vehicle matches or exceeds your
vehicle speed
 When the preceding vehicle is trav-
eling at an extremely slow speed
 Immediately after the cruise control
speed was set
 When depressing the accelerator
pedal
Selecting constant speed con-
trol mode
When constant speed control mode is
selected, your vehicle will maintain a
set speed without controlling the vehi-
cle-to-vehicle distance. Select this
mode only when vehicle-to-vehicle dis-
tance control mode does not function
correctly due to a dirty radar, etc.
1
With the cruise control off, press
and hold the "ON/OFF" button for
1.5 seconds or more.
Immediately after the "ON/OFF" button is
pressed, the dynamic radar cruise control
indicator will come on. Afterwards, it
4-5. Using the driving support systems
switches to the cruise control indicator.
Switching to constant speed control mode
is only possible when operating the lever
with the cruise control off.
2
Accelerate or decelerate, with
accelerator pedal operation, to the
desired vehicle speed (at or above
approximately 20 mph [30 km/h])
and push the lever down to set the
speed.
Cruise control "SET" indicator will come
on.
The vehicle speed at the moment the lever
is released becomes the set speed.
Adjusting the speed setting: P.240
Canceling and resuming the speed setting:
P.242
Dynamic radar cruise control with full-
■
speed range can be set when
● The shift lever is in D.
The desired set speed can be set when
●
the vehicle speed is approximately 20
mph (30 km/h) or more. (However, when
the vehicle speed is set while driving at
243
4