Lexus NX 300h 2020 Owner's Manual page 60

58
1-2. Child safety
Make sure the top tether strap is securely
latched. (P.54)
When installing the child restraint system
with the head restraint being raised, be
sure to have the top tether strap pass
underneath the head restraint.
Top tether strap
A
Hook
B
Rear center seat

1
Adjust the head restraint to the
downmost position.
If the head restraint interferes with the child
restraint system installation and the head
restraint can be removed, remove the head
restraint. (P.141)
2
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top tether
strap.
Make sure the top tether strap is securely
latched. (P.54)
When installing the child restraint system
with the head restraint being lower, be sure
to have the top tether strap pass over the
top of the head restraint.
Top tether strap
A
Hook
B
■ Laws and regulations pertaining to
anchors
The LATCH system conforms to
FMVSS225 or CMVSS210.2.
Child restraint systems conforming to
FMVSS213 or CMVSS213 specifications
can be used.
This vehicle is designed to conform to SAE
J1819.
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
Firmly attach the top tether strap and
●
make sure that the belt is not twisted.
Do not attach the top tether strap to
●
anything other than the anchor
bracket.
After securing a child restraint system,
●
never adjust the seat.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.