Lexus NX 300h 2020 Owner's Manual page 405

point positions.
4
Install the wheel nut wrench in jack
handle.
5
Raise the vehicle until the tire is
slightly raised off the ground.
6
Remove all the wheel nuts and the
tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up to
7-2. Steps to take in an emergency
avoid scratching the wheel surface.
WARNING
Replacing a flat tire
■
● Observe the following precautions.
Failure to do so may result in serious
injury:
• Do not try to remove the wheel orna-
ment by hand. Take due care in han-
dling the ornament to avoid
unexpected personal injury.
• Do not touch the disc wheels or the
area around the brakes immediately
after the vehicle has been driven.
After the vehicle has been driven the
disc wheels and the area around the
brakes will be extremely hot. Touching
these areas with hands, feet or other
body parts while changing a tire, etc.
may result in burns.
403
7