Lexus NX 300h 2020 Owner's Manual page 53

WARNING
Use child restraint system suitable to
●
the age and size of the child and install
it to the rear seat.
If the driver's seat interferes with the
●
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the right-
hand rear seat.
Adjust the front passenger seat so that
●
it does not interfere with the child
restraint system.
Child restraint system fixed with
a seat belt
A child restraint system for a small
child or baby must itself be properly
restrained on the seat with the lap por-
tion of the lap/shoulder belt.
Installing child restraint system
■
using a seat belt (child restraint
lock function belt)
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
Rear-facing — Infant seat/convert-
■
ible seat
1
Adjust the rear seat
If there is a gap between the child seat and
the seatback, adjust the seatback until
good contact is achieved.
1-2. Child safety
2
Place the child restraint system on
the rear seat facing the rear of the
vehicle.
3
Run the seat belt through the child
restraint system and insert the plate
into the buckle. Make sure that the
belt is not twisted.
4
Fully extend the shoulder belt and
allow it to retract to put it in lock
mode. In lock mode, the belt cannot
be extended.
5
While pushing the child restraint
system down into the rear seat,
allow the shoulder belt to retract
51
1