Lexus NX 300h 2020 Owner's Manual page 56

54
1-2. Child safety
High back type

4
Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Check that the shoulder belt is correctly
positioned over the child's shoulder and
that the lap belt is as low as possible.
(P.27)
Removing a child restraint system
■
installed with a seat belt
Press the buckle release button and
fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to the
rebound of the seat cushion. Release the
buckle while holding down the child
restraint system.
Since the seat belt automatically reels itself,
slowly return it to the stowing position.
WARNING
■ When installing a child restraint sys-
tem
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
● Do not allow children to play with the
seat belt. If the seat belt becomes
twisted around a child's neck, it may
lead to choking or other serious inju-
ries that could result in death. If this
occurs and the buckle cannot be
unfastened, scissors should be used to
cut the belt.
Ensure that the belt and plate are
●
securely locked and the seat belt is not
twisted.
Shake the child restraint system left
●
and right, and forward and backward
to ensure that it has been securely
installed.
● After securing a child restraint system,
never adjust the seat.
● When a booster seat is installed,
always ensure that the shoulder belt is
positioned across the center of the
child's shoulder. The belt should be
kept away from the child's neck, but
not so that it could fall off the child's
shoulder.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.