Lexus NX 300h 2020 Owner's Manual page 59

WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
After securing a child restraint system,
●
never adjust the seat.
When using the LATCH anchors, be
●
sure that there are no foreign objects
around the anchors and that the seat
belt is not caught behind the child
restraint system.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
● When securing some types of child
restraint systems in rear seats, it may
not be possible to properly use the
seat belts in positions next to the child
restraint without interfering with it or
affecting seat belt effectiveness. Be
sure your seat belt fits snugly across
your shoulder and low on your hips. If it
does not, or if it interferes with the
child restraint, move to a different posi-
tion. Failure to do so may result in
death or serious injury.
Using an anchor bracket (for top
tether strap)
Anchor brackets (for top tether
■
strap)
Anchor brackets are provided for each
rear seat.
Use anchor brackets when fixing the
top tether strap.
1-2. Child safety
Anchor bracket
A
Anchor bracket for rear center seat
B
Anchor bracket for rear outboard
C
seats
Fixing the top tether strap to the
■
anchor bracket
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
Outboard rear seats

1 Adjust the head restraint to the
upmost position.
If the head restraint interferes with the child
restraint system installation and the head
restraint can be removed, remove the head
restraint. (P.141)
2
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top tether
strap.
57
1