Lexus NX 300h 2020 Owner's Manual page 121

Table of Contents

Advertisement

for the operation to occur.
When all of the doors are locked: If the
movement is detected by the kick sensor,
all of the doors will be unlocked.
Kick sensor
A
Kick sensor detection area
B
3
When the sensor detects that your
foot is pulled back, a buzzer will
sound and the back door will auto-
matically fully open/close.
If kick operation is performed again in the
middle of back door operating, the opera-
tion will stop.
Luggage compartment light
The luggage compartment light turns on
when the back door is opened.
If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 20
minutes.
Power back door operating conditions
With the power back door operations set to
ON, it can automatically open and close for
the following conditions:
When the electronic key is being carried
and the power back door switch is
*
pushed
When the wireless remote control is
*
used
When the power switch is in ON mode,
in addition to the above for the opening
operations, the back door operates for
any of the following conditions:
3-2. Opening, closing and locking the doors
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
*
: When configured with the customization
function so that it can be operated after
being unlocked, operate the back door
after it has been unlocked.
Kick sensor operating conditions (vehi-
cles with Hands Free Power Back Door)
When the kick sensor operation setting is
turned on
The electronic key is within the opera-
tional range. (P.127)
Back door closer
In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the power switch, the
back door closer operates.
Operation of the power back door
A buzzer sounds and the emergency
flashers flash twice to indicate that the
back door is opening/closing.
When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
When the power back door automati-
cally opens, if an abnormality due to peo-
ple or objects is detected, operation will
stop.
Close & lock function
When the power back door is open, this
function closes the power back door and
then locks all of the doors simultaneously.
When the following procedures are per-
formed and there are no electronic keys for
the vehicle within the vehicle, all of the
doors will lock when the power back door is
completely closed.
1
Close all of the doors except the power
back door.
2
While carrying an electronic key, press
the
the power back door.
A different buzzer than the normal one will
switch on the lower part of
119
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents