Kyocera ECOSYS M3645idn Operation Manual page 344

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Password Policy Settings
You can prohibit the setting and use of passwords that do not comply with the password policy.
Setting the Password Policy makes it more difficult to break the password.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[User Login Setting] > [Authentication Security] > [Password Policy Settings]
Configure the settings.
The following settings can be selected.
Item
Password Policy
Minimum Password
Length
Password
Complexity
Maximum Password
Age
Policy Violated User
List
ECOSYS M3145idn ECOSYS M3655idn ECOSYS M3660idn
ECOSYS M3645idn
4500 5500
4500 5500
Select whether or not password policy is enabled.
Value: Off, On
Set the minimum password length of characters for password.
Value: Off, On (1 to 64 characters)
Set the password complexity.
Value
No more than two consecutive identical char: Off, On
At least one uppercase letter (A-Z): Off, On
At least one lowercase letter (a-z): Off, On
At least one number (0-9): Off, On
At least one symbol: Off, On
Set the maximum password age.
Value: Off, On (1 to 180 days)
List of users do not meet password policy requirements.
9-5
6000
6000
Descriptions