Add/Edit Dhcpv6 Relay - ZyXEL Communications GS1920v2 Series User Manual

Hide thumbs Also See for GS1920v2 Series:
Table of Contents

Advertisement

Table 189 NETWORKING > DHCP > DHCPv6 Relay (continued)
LABEL
Remote ID
Add/Edit
Delete

53.7.1 Add/Edit DHCPv6 Relay

Use this screen to add/edit DHCPv6 relay settings for a specific VLAN on the Switch. Click Add/Edit, or
select an entry and click Add/Edit in the NETWORKING > DHCP > DHCPv6 Relay screen to display this
screen.
Figure 249 NETWORKING > DHCP > DHCPv6 Relay > Add/Edit
The following table describes the labels in this screen.
Table 190 NETWORKING > DHCP > DHCPv6 Relay > Add/Edit
LABEL
VID
Helper Address
Interface ID
Remote ID
Apply
Clear
Cancel
Chapter 53 DHCP
DESCRIPTION
This field displays whether the remote-ID option is added to DHCPv6 requests from clients in this
VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
DESCRIPTION
Enter the ID number of the VLAN you want to configure here.
Enter the remote DHCPv6 server address for the specified VLAN.
Enable the switch button to have the Switch add the interface-ID option in the DHCPv6 requests
from the clients in the specified VLAN before the Switch forwards them to a DHCPv6 server.
Enter a string of up to 64 printable ASCII characters (except [ ? ], [ | ], [ ' ], [ " ] or [ , ]) to be
carried in the remote-ID option. The Switch adds the remote-ID option in the DHCPv6 requests
from the clients in the specified VLAN before the Switch forwards them to a DHCPv6 server.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Clear to clear the fields to the factory defaults.
Click Cancel to not save the configuration you make and return to the last screen.
GS1920v2 Series User's Guide
339

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents