Dhcpv4 Vlan Setting; Add/Edit Dhcpv4 Vlan Setting - ZyXEL Communications GS1920v2 Series User Manual

53.6 DHCPv4 VLAN Setting

Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients. Click
NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting to display the screen as shown.
Figure 243 NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting
The following table describes the labels in this screen.
Table 186 NETWORKING > DHCP > DHCPv4 Relay > DHCP Relay VLAN Setting
LABEL
DHCP Relay VLAN Setting
VID
Remote
DHCP Server
Add/Edit
Delete
Port
Use this section to apply a different DHCP option 82 profile to certain ports in a VLAN.
Index
VID
Port
Profile Name
Add/Edit
Delete

53.6.1 Add/Edit DHCPv4 VLAN Setting

Use this screen to add/edit your DHCP settings based on the VLAN domain of the DHCP clients. Click the
Add/Edit button in the DHCP Relay VLAN Setting section of the NETWORKING > DHCP > DHCPv4 Relay >
DHCP Relay VLAN Setting screen to access this screen.
Chapter 53 DHCP
DESCRIPTION
This field displays the ID number of the VLAN group to which this DHCP settings apply.
This displays the IP address of a DHCP server in dotted decimal notation.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
This field displays a sequential number for each entry. Click an index number to change the
settings.
This field displays the VLAN to which the ports belongs.
This field displays the ports to which the Switch applies the settings.
This field displays the DHCP option 82 profile that the Switch applies to the ports in this VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
GS1920v2 Series User's Guide
335