Add/Edit A Static Vlan - ZyXEL Communications GS1920v2 Series User Manual

49.4.1 Add/Edit a Static VLAN

Use this screen to configure a static VLAN for the Switch. Click Add/Edit, or select an entry and click
Add/Edit in the SWITCHING > VLAN > VLAN Setup > Static VLAN screen to display this screen.
Figure 214 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit
The following table describes the related labels in this screen.
Table 160 SWITCHING > VLAN > VLAN Setup > Static VLAN > Add/Edit
LABEL
Active
Name
VLAN Group ID
Port
*
Chapter 49 VLAN
DESCRIPTION
Enable the switch button to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes. This name consists of up
to 64 printable ASCII characters. The string should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Note: Do NOT add a VLAN ID that has been used in the SWITCHING > VLAN > Voice
VLAN Setup.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
GS1920v2 Series User's Guide
301