Oam Setup - ZyXEL Communications GS1920v2 Series User Manual

Hide thumbs Also See for GS1920v2 Series:

Table of Contents

Table 92 PORT > OAM > OAM Status > OAM Details (continued)

32.3 OAM Setup

Use this screen to turn on Ethernet OAM on the Switch and ports and configure the related settings.

Click PORT > OAM > OAM Setup to display the configuration screen as shown.

Figure 133 PORT > OAM > OAM Setup

The following table describes the fields in the above screen.

Table 93 PORT > OAM > OAM Setup

Chapter 32 OAM

This field displays the number of unsupported OAM PDUs sent on the port.

This field displays the number of unsupported OAM PDUs received on the port.

Enable the switch button to enable Ethernet OAM on the Switch.

This field displays the port number.

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first to

set the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

GS1920v2 Series User's Guide

Show Quick Links

Table of Contents