Arp Inspection - Port Configuration - ZyXEL Communications RGS Series User Manual

5.3.35 ARP Inspection – Port Configuration
This page provides ARP Inspection
Object
Mode of ARP Inspection
Configuration
Port Mode Configuration
92
related configuration.
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and
Port Mode on a given port are enabled, ARP Inspection is enabled on this given port.
Possible modes are:
Enabled: Enable ARP Inspection operation.
Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN configuration, you have to enable the setting of
"Check VLAN". The default setting of "Check VLAN" is disabled. When the setting of
"Check VLAN" is disabled, the log type of ARP Inspection will refer to the port setting.
And the setting of "Check VLAN" is enabled, the log type of ARP Inspection will refer
to the VLAN setting. Possible setting of "Check VLAN" are:
Enabled: Enable check VLAN operation.
Description