Classifier Setup - ZyXEL Communications GS1920v2 Series User Manual

the rules.
Click SECURITY > ACL > Classifier > Classifier Status to display the configuration screen as shown.
Figure 267 SECURITY > ACL > Classifier > Classifier Status
The following table describes the labels in this screen.
Table 203 SECURITY > ACL > Classifier > Classifier Status
LABEL
Index
Active
Weight
Name
Match Count
Rule
Clear the Classifier
Any
Classifier
Clear

58.3 Classifier Setup

Use this screen to view and configure the classifiers. After you define the classifier, you can specify
actions (or policy) to act upon the traffic that matches the rules.
Click SECURITY > ACL > Classifier Setup to display the configuration screen as shown.
Chapter 58 Classifier
DESCRIPTION
This field displays the index number of the rule.
This field displays whether the rule is activated or not.
This field displays the rule's weight. This is to indicate a rule's priority when the match order is set
to manual in the SECURITY > ACL > Classifier > Classifier Global Setting screen.
The higher the number, the higher the rule's priority.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays the number of times a rule is applied. It displays '–' if the rule does not have
count enabled.
This field displays a summary of the classifier rule's settings.
Select Any, then click Clear to clear the matched count for all classifiers.
Select Classifier, enter a classifier rule name and then click Clear to erase the recorded
statistical information for that classifier, or select Any to clear statistics for all classifiers.
Click Clear to erase the recorded statistical information for the classifier.
GS1920v2 Series User's Guide
366