Sanyo VCC-XZN600P Instruction Manual page 98

After selecting the display language, the main screen appears and the live video from the camera is displayed in
the video display area.
(From the second time onwards, if the language selection screen is left for longer than 10 seconds, the last
display language is automatically selected and the main screen appears.)
After the camera is turned on, it will take about 1 minute for the camera to be available for accepting
any accesses.
When you specify the port number for the camera to a number other than 80, add ":" (colon) and the
port number after the IP address in specifying the URL.
<<Example: when "50000" is specified for the port> >
http://192.168.0.2:50000/
When you enable the [SSL] options, type "https://" instead of "http://" before the IP address when
specifying the URL.
Also while using the supplied "VA-SW3050Lite" monitoring software or the separately ordered "VA-
SW3050" recorder/player software, you can access the camera from Web browser simultaneously.
However, when the user who uses the software performs one of the following actions, other Web-
based concurrent admin users will be disconnected.
Camera Setting
Normal Recording & Live Setting (JPEG)
Live Setting (H.264)
Alarm Setting
When your operating system is Windows XP, you can use the UPnP (Universal Plug and Play) connection to
access the camera.
In the UPnP connection, double-clicking the icon for the camera in the [My Network Places] window will activate
the camera access process. Entering the URL is not required.
1
In the [Add or Remove Programs] on the Control Panel, open [Add/Remove Windows
Components].
2
Select "Networking Services" and click [Details].
3
Select the check box for the UPnP component in the list, and click the [OK] button.
The UPnP component title in the list should be either "Universal Plug and Play" or "UPnP User Interface"
depending on your PC.
98 / 153