Sanyo VCC-XZN600P Instruction Manual page 3

1
Push the lever.
The terminal hole opens.
2
Insert the cable into the terminal hole.
Be sure to insert the cable firmly all the way to the end.
3
Release the lever.
The cable is now locked.
Make sure that the cable is locked firmly in place.
To prevent short-circuiting, make sure that the stripped wire portion is not exposed out of the
connector.
This connector is a separable type.
Separating the connector by pressing the connector lever
changing the connection with the power supply.
facilitates your work, especially when
A
3 / 153