Sanyo VCC-XZN600P Instruction Manual page 104

The slide bar is used to select the desired zoom magnification.
In addition, clicking the
Pressing and holding the
When the electronic zoom function (EL ZOOM) is enabled on the camera and the zoom
magnification reaches the maximum value of optical zoom (x30), clicking the
activates the electronic zoom function.
You can zoom in and out with the mouse wheel on the ActiveX screen.
Perform the following operations after clicking the screen to activate it.
Rotate the mouse wheel forward: To zoom out
Rotate the mouse wheel backward: To zoom in
Specifies the video resolution at five levels.
(At three levels when the image compression format is "H.264".)
Specifies the video quality in five levels.
If [PRE/POST] is set at other than "0%/100%" on the [IMAGE TRANSFER SETTINGS] screen, the
values of [RESOLUTION] and [PICTURE QUALITY] cannot be changed.
Restores the camera lens orientation and the zooming and focusing settings to the status registered as a preset
to
position.
Registers the current camera lens orientation and the current zooming and focusing settings as a preset
position.
To register the preset position, select the number to be used for current setting from the pull-down menu and
click the [MEMORY] button.
Specifies the video brightness at five levels.
Allows you to change the DAY/NIGHT switching conditions configured using the camera menu.
AUTO Switches the video display automatically between color and black-and-white depending on daytime or nighttime brightness.
COLOR Always displays the color video image.
B/W Always displays the black-and-white video image.
These buttons are reserved for additional functions.
The function corresponding to the number selected in the pull-down menu will be performed. The function
(WIDE)/ (TELE) button allows you to select desired zoom magnification.
(WIDE)/ (TELE) button consecutively changes the zoom magnification.
104 / 153
button further