When the [IMAGE TRANSFER SETTINGS] screen appears, select the image transfer mode in [IMAGE
TRANSMISSION], and display each setting screen.
OFF:
Image transmission is disabled.
HTTP:
Transfers the image to the recording/playing software (VA-SW3050), which is optionally available.
FTP:
Transfers the image to the FTP server.
When the alarm settings are performed in the "VA-SW3050", the [IMAGE TRANSMISSION] setting
on this screen is automatically set to the "HTTP". The "FTP" cannot be selected.
When you record and play video in the HTTP mode, configure the recording conditions on the screen of "VA-
SW3050".
123 / 153