Port Number; Server Address - Sanyo VCC-XZN600P Instruction Manual

Set the image transfer mode to "FTP".
The following FTP information is specified in these setting items.

PORT NUMBER

Please set the same number as the control port number configured on the server. Normally "21" is set.
Do not specify the following values to the transmission port; from 4000 to 5000, 10000, 10001 and
38214.

SERVER ADDRESS

When you specify the domain name, also specify the DNS of your network.
USER ID
PASSWORD
FTP PASSIVE
Configures the operating conditions and camera ID for alarm image transmission.
1
125 / 153