Sanyo VCC-XZN600P Instruction Manual page 121

Specifies the recipient's e-mail address to which the e-mail is sent. You can specify up to five e-mail addresses.
Type the recipient's e-mail address and check the check box to the left of the e-mail address field.
1
When you want to attach the image file to the e-mail, check the check box for the recipient under the
2
[ATTACH IMAGE] title.
File name of the attached image:
CAMERA ID + yymmddhhmmss + _0001(sequence number).jpg
The following letters contained in the CAMERA ID will be replaced by "-" (hyphen):
" ' " (single quotation), " " " (double quotation), "\" (backslash), "/" (slash), "<", ">", "?", "|", "*",
":" (colon) and ";" (semicolon).
Clicking [TEST] sends test mails to all the transmission destinations whose check box is selected. "TEST"
3
is displayed in the subject of test mails.
When authentication is required for sending e-mails, configure the following settings:
AUTHENTICATION
USER ID
PASSWORD
POP3 SERVER ADDRESS (domain name or IP address)
Specifies the settings of the alarm notification e-mail sent when the alarm condition is detected.
OFF Disables the alarm notification e-mail.
ON Sends the alarm notification e-mail when the alarm condition is detected.
SCHEDULE Sends the alarm notification e-mail if the alarm condition is detected during the scheduled time.
You can specify your own subject and comments inserted into the alarm notification e-mail. The camera title,
date and time of the detected alarm condition, and the IP address of the camera are automatically inserted into
the notification e-mail as default information.
SUBJECT:
Specifies the e-mail subject (up to 32 characters) displayed at the top of the e-mail message.
TEXT:
Specifies your additional comment (up to 64 characters) appended after the default information.
When you select "SCHEDULE" in the setting for the [ALARM]
time for e-mails to be sent on the [SCHEDULE SETTINGS] screen and set the [ALARM (SMTP)]/
[TIMER (SMTP)] settings to "ON".
Specifies the preferences for sending notification e-mail using the timer.
E-mails are sent automatically at the interval specified in [TX RATE].
OFF Disables the timer used for sending the notification e-mails.
ON Sends the notification e-mails using the timer.
SCHEDULE Sends e-mails using the timer, only as scheduled on the [SCHEDULE SETTINGS] screen.
6
121 / 153
or [TIMER] section, specify the
7