Sanyo VCC-XZN600P Instruction Manual page 95

check box.
Be sure to confirm that the [Internet Protocol (TCP/IP)] check box is selected. If the check box is disabled, select
it to enable the option.
5
Click [Properties].
[General] tab appears in the [Internet Protocol (TCP/IP) Properties] dialog box.
6
Select the [Use the following IP address:] radio button and complete the [IP address:], [Subnet
mask:] and [Default gateway:] fields.
7
Confirm the settings and click the [OK] button.
This completes the TCP/IP settings. Close all dialog boxes in the display.
Web browser is required to access the camera. Install Internet Explorer Ver.6.0 or higher on your PC.
In the cases below, perform the Internet Explorer's settings by clicking [Tool] and then [Internet Options].
95 / 153