Sanyo VCC-XZN600P Instruction Manual page 50

1
Use the / button to select [ACTION], and use the
Under the item [ACTION], [RATIO] and [ZOOM TIME] appear.
2
Use the / button to select [RATIO], and use the
magnification power used when the alarm is detected.
Available settings: WIDE (widest angle), 1/8, 1/5.6, 1/4, 1/2.8, 1/2, 1/1.4, x1.4, x2, x2.8, x4, x5.6, x8, TELE
(maximum telephoto), and MANU
Use the
1
The RATIO SETTING screen appears. On this screen, the
operation and the
Use the
2
the SET button.
The settings made in step
The / button can be used to adjust the focus even when the auto focus is set ([FOCUS] is set to
"AUTO").
3
Use the / button to select [ZOOM TIME], and use the
which the zoomed image is displayed.
Available settings: 5S, 10S, 15S, 20S, 30S, 45S, 1M, 2M, 3M, 4M, 5M (S: seconds, M: minutes)
/ button to choose "MANU" and press the SET button.
and buttons for focusing operation.
/ button to adjust the zoom and use the
are saved and the ALARM IN screen appears again.
2
/ button to choose "ZOOM".
/ button to choose the desired
and
/ button to adjust the focus and press
/ button to set the duration for
50 / 153
buttons are used for zooming