Sanyo VCC-XZN600P Instruction Manual page 42

1
Use the / button to select [DAY/NIGHT], use the
SET button.
The D/N SETTING-B/W screen appears.
2
Use the / button to select [BURST] and use the
Set whether or not to insert a color burst signal into the black/white signal. Normally, set [BURST] to "OFF".
Available settings:
ON: Inserts a burst signal.
OFF: Does not insert a burst signal.
3
Use the / button to select [FOCUS] and use the
compensation mode.
Normally, set the focus compensation mode to "1". However, if the target gets out of focus, set this to "2".
Available settings:
1: Use this mode if the camera is used under near-infrared lighting.
2: Use this mode if the camera is used under natural sunlight or normal lighting.
4
Select [MENU] and choose "BACK" or "END" to complete the setting.
/ button to choose "B/W", and press the
/ button to turn ON/OFF the burst signal.
/ button to choose the focus
42 / 153