Sanyo VCC-XZN600P Instruction Manual page 20

Use this setting to set the white balance according to the installation conditions of the camera.
ATW: Auto trace white balance
AWC: Push-lock auto white balance
3200: Fixed white balance (for indoors)
5600: Fixed white balance (for outdoors)
FLUO: Fixed white balance (for fluorescent lighting)
MWB: Manual white balance
Auto trace white balance (ATW) automatically adjusts the white balance to provide optimal colors, even if the
light source for the target objects is changed.
1
Use the / button to select [WHITE BALANCE], use the
press the SET button.
The ATW SETTING screen appears.
2
Select [MENU] and choose "BACK" or "END" to complete the setting.
To mask a specific light source, or to set the SMART ATW function, do the following.
If the target objects include an extremely bright light source, set a mask as follows to correct the white balance.
1
Use the / button to select [MASKING], use the
SET button.
The ATW MASKING screen appears, with a blinking mask pattern shown at the top left.
2
Use the
press the SET button.
This sets a mask at the position where you moved the mask pattern. A new mask pattern starts blinking.
buttons to move the mask pattern over the light source you want to mask and
/ button to choose "ATW", and
/ button to choose "ON", and press the
20 / 153