Sanyo VCC-XZN600P Instruction Manual page 71

1
Use the / button to select [NETWORK], and press the SET button.
The NETWORK SETTING screen appears.
2
Use the / button to select [IP ADDRESS], and use the
setting mode.
Available settings:
FIX: Assigns the IP address manually.
AUTO: Assigns the IP address automatically using the DHCP function.
Pressing the SET button displays the IP ADDRESS SETTING screen.
1
Use / button to select [IP ADDRESS], and press the
The IP ADDRESS setting screen appears.
2
Use the button to select the digit and use the
button. Repeat the procedure until the entire address is entered.
The IP ADDRESS SETTING screen appears again.
3
Perform settings for [SUBNET MASK] and [GATEWAY] using the same procedure for [IP
/ button to select the IP address
button.
/ button to enter the number, and press
71 / 153