Sanyo VCC-XZN600P Instruction Manual page 118

While other users are viewing H.264 images
Specifies the H.264 image settings.
RESOLUTION
PICTURE QUALITY
FRAME RATE
PRIORITY
Specifies the priority regarding the change of video bit rate.
VBR Variable bit rate
CBR Constant bit rate
Specifies the streaming conditions of H.264 image.
PROTOCOL
Sets the transmission protocol (UDP (Unicast) or HTTP) of H.264 images.
UDP(Unicast) PORT
When [PROTOCOL] is set to "UDP (Unicast)", set the Unicast transmission port number.
Specify a numeric value in the range of 1025 to 65535.
Do not specify the following values to the transmission port; from 4000 to 5000, 10000, 10001 and
38214.
49152 (reserved for UPNP port) cannot be set.
MULTICAST SET
To enable the multicast streaming, set [MULTICAST SET] to "ON", and specify the following settings
related to the multicast.
The multicast streaming is available only in Local Area Network.
UDP(Multicast) IP
Specify a numeric value in the range of 224.0.0.0 to 239.255.255.255.
UDP(Multicast) PORT
Specify a numeric value in the range of 1025 to 65535.
Do not specify the following values to the transmission port; from 4000 to 5000, 10000, 10001 and
38214.
49152 (reserved for UPNP port) cannot be set.
MULTICAST TTL
Specify a numeric value in the range of 0 to 255.
The packet transmission distance range is controlled by TTL (Time To Live). As the numeric value of
the [MULTICAST TTL] setting becomes larger, the transmission distance range also becomes larger.
The default value (16) provides adequate transmission for the standard internal network.
After completing the settings, click this button to confirm the settings.
118 / 153