Wall Mounting A Multiline Terminal Using The Wall Mount Unit (Wm-R( ) Unit); Figure 4-31: Bundling The Line Cord; Figure 4-32: Attaching The Wall Mount Unit To The Wall - NEC Xen alpha Installation Manual

10.3
Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
November 2003, A6-506000-642-01(8508), Release 6.0
Wall Mounting a Multiline Terminal using the Wall Mount Unit
(WM-R( ) Unit)
This Wall Mount Unit is used to mount any D
DTR-2DT-1A( ) TEL) to the wall. This unit connects to the back side of the
telephone.
When adapters are installed, the telephone must be mounted on the wall using
the WM-R( ) Unit.
1. Plug line cord in the wall receptacle. Leave about 200mm of cord and
bundle the rest as shown in Figure 4-23: Bundling the Line Cord.

Figure 4-31: Bundling the Line Cord

2. Feed the line cord through the opening in the wall mount unit as illustrated
in Figure 4-32: Attaching the Wall Mount Unit to the Wall.
3. Attach the WM-R( ) Unit using six screws.

Figure 4-32: Attaching the Wall Mount Unit to the Wall

term
Series i telephone (except the
105