Installing Line Cards And Plastic Panels; Installing The Line Card And Plastic Panel; Figure 4-8: Installing The Line Card On A Dterm Series I Multiline Terminal; Figure 4-9: Installing The Plastic Panel On A Dterm Series I Multiline Terminal - NEC Xen alpha Installation Manual

S 5
E C T I O N
5.1
I L
NSTALLING INE
C
ARDS AND
P
LASTIC
P
ANELS
94

Installing the Line Card and Plastic Panel

Line key designations are entered on the line card that is then placed on the
telephone to provide a quick reference of key designations. The line cards can
be changed as necessary. The plastic panel is placed on top of the line card to
hold it in place.
1. Place the line card over the keys on the Multiline Terminal.
If replacing an existing plastic panel or line card refer to Section 9:
Removing the Plastic Panel on page 1-95.
Line Card

Figure 4-8: Installing the Line Card on a Dterm Series i Multiline Terminal

2. Place the plastic panel over the line card and push the corners of the
plastic panel until they click into place.
Plastic Panel

Figure 4-9: Installing the Plastic Panel on a Dterm Series i Multiline Terminal

Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
Multiline Terminal
Multiline Terminal
A6-506000-642-01(8508), Release 6.0, November 2003