Wall-Mounting The Multiline Telephone; Figure 2-93 Cabling For Wall-Mount; Figure 2-94 Wall-Mount Unit - 24Tixh-C; Figure 2-95 Hook-Switch Hanger - NEC SL1100 Hardware Manual

SL1100

5.1.3 Wall-Mounting the Multiline Telephone

1. Arrange the cables and put down the leg as shown below.
Leg
For IP4WW-24TIXH-C only:
When wall-mounting the IP4WW-24TIXH-C, attach the IP4WW-WALL MOUNT UNIT to the bottom panel
as shown.
IP4WW-WALL
MOUNT UNIT
Claws
2. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
2-60

Figure 2-93 Cabling for Wall-Mount

Figure 2-94 Wall-Mount Unit - 24TIXH-C

Figure 2-95 Hook-Switch Hanger on the next
Handset cord
Telephone
line cord
< Bottom view>
Claws
IP4WW-24TIXH-C
page.
ISSUE 1.0
Installation