Ad(A)-R( ) Unit (Ancillary Device Adapter); Figure 5-5: Connecting The Ac Adapter To An Installed Adapter; Figure 5-6: Ad(A)-R( ) Unit - NEC Xen alpha Installation Manual

3.2
112
3.1.1 Connecting the ACA-U( ) Unit
1. Unplug the ACA-U( ) Unit from the AC outlet. (Failing to do this
can damage the unit and/or the Multiline Terminal.)
2. Prepare Multiline Terminal for adapter installation. Refer to Section
9: Preparing for Adapter Installation on page 1-109.
3. Locate the plug on the ancillary device that is connected to the
bottom of the Multiline Terminal and plug in the AC Adapter.

Figure 5-5: Connecting the AC Adapter to an Installed Adapter

AD(A)-R( ) Unit (Ancillary Device Adapter)

This Ancillary Device Adapter, shown on Figure 5-6: AD(A)-R( ) Unit, allows
connection of a tape recorder to all D
DTR-2DT-1A( ) TEL.

Figure 5-6: AD(A)-R( ) Unit

Installation Manual, Chapter 5 – Installing Dterm Series i Optional Equipment
term
Series i Multiline Terminals except the
A6-506000-642-01(8508), Release 6.0, November 2003