Figure 2-19: Inserting The External Rom Card - NEC Xen alpha Installation Manual

To upgrade a Xen Alpha system:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Using PC Programming, upload the saved system setup.
Installation Manual, Chapter 2 – KSU Installation
November 2003, A6-506000-642-01(8508), Release 6.0
Use PC Programming, download and 'save to disk' the current system setup.
Switch the system OFF.
Remove the cover from the KSU.
Clear system memory (refer to page 36).
Locate connector CN11 (marked External ROM) on the mainboard and plug the
ROM card into it.

Figure 2-19: Inserting the External ROM Card

Turn the system ON. LED LD1 on the ROM card and the LIVE LED on the
mainboard will light red. The ROM LED on the mainboard will flash red to indicate
that the program is in the process of being transferred.
Once the ROM LED has stopped flashing, turn the system OFF and remove the
ROM card.
Replace the KSU cover.
Turn the system ON.
59