Figure 6-37: Installing Adapter In Connector 1; Figure 6-38: Installing Dummy End B - NEC Xen alpha Installation Manual

8. If Adapter is installed in Connector 1 as show in Figure 6-37: Installing Adapter in
Connector 1, Install Dummy end B as shown in Figure 6-38: Installing Dummy
End B.

Figure 6-37: Installing Adapter in Connector 1

Figure 6-38: Installing Dummy End B

144
Installation Manual, Chapter 6 – Installing DTU-Type Multiline Terminals
A6-506000-642-01(8508), Release 6.0, November 2003