Wall Mounting A Keyset; Wall Mounting A Keyset On A Standard Wall Plate - NEC DSX-40 Hardware Manual

Wall Mounting

Wall Mounting a Keyset

Wall Mounting a Keyset on a Standard Wall Plate

To mount the telephone on the standard wall plate:
1. Locate and wire a standard wall plate in a convenient location.
Fold the telephone legs into the wall mount position.
2.
Make sure the handset coil cord is routed through the lower channel in the base.
3.
Fold the two leg supports down flush with the legs.
4.
5. Plug a short line cord into the telephone base.
• If required, coil the excess line cord into the cavity as shown.
6. Plug the other end of the short line cord into the wall plate.
7. Place the telephone on top of the wall plate and slide into place.
5
58 ◆ Optional Equipment
4
Figure 37: Mounting the Telephone to a Standard Wall Plate
4
2
3
1
7
6
7
DSX-40 Hardware Manual