Figure 2-125 Inserting Screws Into The Wall For Wall Mounting The Telephone; Figure 2-126 Placing The Telephone Cords Inside The Wall Mount Stand; Figure 2-127 Attaching The Wall Mount Unit To The Wall - NEC SL1100 Hardware Manual

ISSUE 1.0

Figure 2-125 Inserting Screws into the Wall for Wall Mounting the Telephone

2. Plug in and secure the AC adapter.
3. Plug the AC adapter into the base unit.
4. Plug one end of the short telephone cord into the LINE jack on the base unit. Then plug one end
of a SL1100 multiline terminal into the PHONE jack. Place the telephone cords inside the molded
channels on the bottom of the wall mount stand.

Figure 2-126 Placing the Telephone Cords Inside the Wall Mount Stand

5. Place the base unit on the posts of the wall screws and push down until it is firmly seated.

Figure 2-127 Attaching the Wall Mount Unit to the Wall

Hardware Manual
SL1100
2-77