Wall Mounting Multiline Terminals; Wall Mounting A Multiline Terminal Using The Base Plate; Figure 4-20: Removing The Hanger Hook On A Multiline Telephone; Figure 4-21: Sliding The Hanger Hook Into Position - NEC Xen alpha Installation Manual

S 1 0
E C T I O N
There are two methods for wall mounting a D
the base cover and using a wall mount unit. A wall mount unit must be used if adapters
W
ALL
have been installed on the Multiline Telephone.
M
OUNTING
M
ULTILINE
T
10.1
ERMINALS
100

Wall Mounting a Multiline Terminal using the Base Plate

10.1.1 Adjusting the Hanger Hook
1. Remove the hook from the unit.
Hanger Hook

Figure 4-20: Removing the Hanger Hook on a Multiline Telephone

2. Turn the hook with the tab toward the top.
3. Slide the hook on until it glides into position forming the hanger
hook for the handset.

Figure 4-21: Sliding the Hanger Hook into Position

Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
term
Series i Multiline Telephone; using
A6-506000-642-01(8508), Release 6.0, November 2003