Table of Contents
Advertisement
S
3
ECTION
Terminal Update
C
ONNECTING AN
Before ETW-type Multiline Terminals can be operated on a Xen Alpha system, the
ETW-T
YPE
keypad may need to be changed. Replacement keypads and installation instructions
M
ULTILINE
are available for purchase from the NEC CNS ICP Service Department.
T
ERMINAL
Modular Terminal Connections
Connecting Multiline Terminals and SLT Adapters.
When connecting ETW-type Multiline Terminals or SLT Adapters to the MDF or IDF,
individually twisted 1-pair cabling must be used. Refer to Figure 7-1: Modular Terminal
Connections for Multiline Terminals – for an illustration of connections.
Attach a Multiline Terminal to the System
1.
2.
160
Figure 7-1: Modular Terminal Connections for Multiline Terminals
Plug a telephone cord into the modular jack on the bottom side of the
Multiline Terminal.
Lead the cord out through the cord groove as shown in Figure 7-2: Connecting an
ETW-Type Multiline Terminal – .
Figure 7-2: Connecting an ETW-Type Multiline Terminal
Installation Manual, Chapter 7 – Installing ETW-Type Multiline Terminals
To
MDF
YL
BK
Station
Cable
Y
B
Modular
Terminal
A6-506000-642-01(8508), Release 6.0, November 2003
Advertisement
Table of Contents
