Flexible Power Management
If you are experiencing network performance issues, and suspect the scanner is
interfering with other devices, you can turn down the power output of the scanner.
This reduces the range between the scanner and a base or an Access Point as
shown in the following illustration:
Xenon XP 1952g/1952h
Scan one of the barcodes below to set the scanner's power output to Full Power
(100%), Medium Power (35%), Medium Low Power (5%), or Low Power (1%).
Default = Full Power.
For Bluetooth Class 1 operation, use Full Power.
For Bluetooth Class 2 operation, use Medium Power or lower.
For BLE operation, use Medium Power.
Xenon XP User Guide
802.11
LAN
* Full Power
Medium Low Power
Scanner
Reduced
Power
Full
Power
Medium Power
Low Power
61