Function Code Transmit; Intercharacter, Interfunction, And Intermessage Delays; Intercharacter Delay - Honeywell Xenon XP 195 Series User Manual

Function Code Transmit

By default, all ASCII control characters are transmitted with barcode data. These
non-printable characters are translated into predefined key strokes, or CTRL+X
functions (see
If these key strokes interfere with your host's software application, scan Disable to
keep these ASCII control characters from being transmitted. Default = Enable.
Note: You can also use a custom data format (see
translate these characters into a more meaningful output.

Intercharacter, Interfunction, and Intermessage Delays

Some terminals drop information (characters) if data comes through too quickly.
Intercharacter, interfunction, and intermessage delays slow the transmission of
data, increasing data integrity.

Intercharacter Delay

An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each character of scanned data. Scan the
Intercharacter Delay barcode below, then scan the number of 5ms delays from the
Programming Chart,
128
Clear All Suffixes
ASCII Conversion Chart (Code Page 1252),
* Enable
beginning on page 311, then Save.
Data Format
Prefix Scanned Data
1 2 3 4 5
Intercharacter Delay
Intercharacter Delay
beginning on page 300).
Disable
beginning on page 131) to
Suffix
Xenon XP User Guide