Honeywell Xenon XP 195 Series User Manual page 32

custom defaults, it will reset the scanner to the factory default settings. Any
settings that have not been specified through the custom defaults will be defaulted
to the factory default settings.
Activate Custom Defaults
Note: If using a cordless system, scanning this barcode also causes both the scanner and
the base or Access Point to perform a reset and become unlinked. The scanner must
be placed in its base to re-establish the link. If using an Access Point, the linking
barcode must be scanned. See Cordless System Operation beginning on page 41 for
additional information.
14 Xenon XP User Guide