Table of Contents
Advertisement
Trigger Modes
Manual Trigger
When in manual trigger mode, the scanner scans until a barcode is read, or until
the trigger is released. Two modes are available, Normal and Enhanced. Normal
mode offers good scan speed and the longest working ranges (depth of field).
Enhanced mode will give you the highest possible scan speed but slightly less
range than Normal mode. Enhanced mode is best used when you require a very
fast scan speed and don't require a long working range. Default = Manual Trigger-
Normal.
* Manual Trigger - Normal
Trigger Toggle
Trigger Toggle mode lets you quickly hit the trigger two or three times to put the
scanner into either imaging mode or centering mode, then toggle back to
scanning. So, like a double-click with a mouse, you can control what the next
scanner's action will be. For example, you could double-press the trigger to go into
imaging mode, then the next trigger press takes the image. The scanner then
reverts to scanning mode. Use the following codes to configure what action you
would like the scanner to take when in Trigger Toggle mode.
Xenon XP User Guide
*Trigger Toggle Off
Trigger Toggle - Centering
Manual Trigger -
Enhanced
Trigger Toggle - Image Capture
87
Advertisement
Table of Contents
