Honeywell Xenon XP 195 Series User Manual page 202

Don't Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda, and
you want to disable this feature, scan Don't Require 5 Digit Addenda. EAN-13
barcodes are transmitted, depending on the setting you are using for
Addenda
Default = Don't Require 5 Digit Addenda.
* Don't Require 5 Digit Addenda
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
length (in milliseconds) for this timeout by scanning the barcode below, then
setting the timeout (from 0-500 milliseconds) by scanning digits from the
Programming Chart,
120.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the barcode and
the data from the addenda. When turned Off, there is no space. Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to
EAN-13 with Extended Coupon Code
184
Required.
beginning on page 311 of this manual, then Save. Default =
Addenda Timeout
* On
EAN/JAN-13 Addenda
(page 173).
EAN/JAN-13
Require 5 Digit Addenda
Required. Set the
Off
UPC-A/
Xenon XP User Guide